Boitier Isolateur USB Certifié

Les isolateurs USB effectuent un découplage de potentiel pour connexions USB et séparent le système PC "normal" de l'application critique. Ce sont les outils professionnels pour éviter et combattre les boucles avec la terre, les courants d'égalisation et pour se protéger contre les surtensions.

La qualité certifiée

La haute tension d'isolement de 7500Vpk et la certification selon la norme EN60601-1 Rév. 3.1 recommandent l'isolateur pour les applications très sensibles et critiques

Garantie 3 ans

ISOUSB-BOX-PLUS
Isolation strength	Certified 4000Vrms 1min, reinforced isolation, 2*MOPP Permissible and tested with single isolation: 5000Vrms 1min, 7500Vdc 1sec.
Working range	250Vrms permanent potential difference
Transient protection	Integrated protection diodes with appr. ±15kV according to IEC 61000-4-2 Protection class Protection class II, Housing IP30
Energy transfer	Primary to secondary side max. 3W, efficiency about 85%
Overload protection	The output is short-circuit protected. Overload indication by red LED. In this case the output is switched off.
Input	Supply through USB, 5Vdc, max. 0.9A in case of overload.
Output	USB standard signals. Supply 5Vdc, 500mA maximum
Connectors	Primary: High retension USB Jack Type B, Secondary: High retension Jack Type A
Cable length	The length of the USB cables must not exceed 5m on both sides.
Transmission	USB 2.0+1.1 Full Speed, completely transparent
Work environment	5°C to 45°C, 5-90% humidity, 500 - 1060hPa atm. pressure
Storage/Shipment	0°C to +70°C, 0 - 90% humidity, 500 - 1060hPa atm. pressure
Scope of delivery	ISOUSB-Box-PLUS with USB primary connection cable about 1.8m and Operating manual
Approval	IEC60601-1:2012(Ed3.1), IEC60601-1-2:2015, 2*MOPP, EN55011 Class B. FCC 47 CFR Part 15 ICES-003: Issue 6, JIS T 0601-1:2017 (IEC 60601-1:2005 +A1:2012(MOD)).
Lifespan	10 years or 10000 operating hours, according to which time is shorter. 3 years manufacturer warranty
Dimensions	96mm * 57mm * 18mm (LWH), Weight about. 110g