Kit Développement Cortex-A5 (SAMA5D35)
[MYD-SAMA5D35]

277€ HT

[EN STOCK]
Avec Atmel SAMA5D35


Idéal pour applications industrielles mobiles intelligentes
Kit Développement Cortex-A5 (SAMA5D35)
Avis des clients
 
 
 MYC-SAMA5D3X CPU Module 
DDR2 SO-DIMM 200-pin Signals Consistent
   with Atmel's Official Board
 536MHz Atmel SAMA5D3  ARM Cortex-A5
 512MB DDR2 SDRAM, 256MB Nand Flash,
    4MB Data Flash, 16MB Nor Flash
 Serial ports, USB, Ethernet, CAN, RS485,
    SD, Audio, LCD, HDMI
 Two Ethernet for SAMA5D35/36
 Two CAN for SAMA5D34/35/36
 HDMI /LCD Display for SAMA5D31/33/34/36
 Ready-to-Run Linux 3.6.9 , Android 4.0.4
Description
The MYD-SAMA5D3X Development Board is a fully-featured evaluation board for the ARM Cortex-A5 based Atmel SAMA5D3 series MPUs (Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36) which can operate at up to 536MHz(850DMIPS) at under 150mW, delivering a high-performance, low-power platform for cost-sensitive industrial and consumer applications. It is a ready-to-run Linux and Android Cortex-A5 evaluation platform and offered with optional 4.3- and 7-inch LCD modules, USB 3G module, USB Camera moduleUSB WiFi module and GPS module. It can work in harsh environment supporting -40 to +85 Celsius extended temperature operation for industrial embedded applications.
 
The MYD-SAMA5D3X ARM board has a commonly-used base board equipped with a different MYC-SAMA5D3X CPU module. The MYC-SAMA5D3X is an ARM controller board which can be served as the core of your embedded system. It has integrated the Atmel SAMA5D3 ARM Cortex-A5 processor, 512MB DDR2 SDRAM, 256MB Nand Flash, 16MB Nor Flash, 4MB Data Flash and Gigabit Ethernet PHY and uses a DDR2 SO-DIMM 200-pin expansion connector to provides an interface for the base board to carry all the I/O signals to and from the CPU module. A set of peripherals have been brought out through headers and connectors on the MYD-SAMA5D3X base board including 2 x serial ports, 3 x USB2.0 ports, up to 2 x Ethernet, up to 2 x CAN, RS485, Audio, SDIO/SD/MMC, etc. And four of the modules SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D36 offer HDMI and LCD display support.
 
MYD-SAMA5D3X Development Board series have following models:
MYD-SAMA5D31 Development Board (based on Atmel SAMA5D31) using MYC-SAMA5D31 
MYD-SAMA5D33 Development Board (based on Atmel SAMA5D33) using MYC-SAMA5D33
MYD-SAMA5D34 Development Board (based on Atmel SAMA5D34) using MYC-SAMA5D34 
MYD-SAMA5D35 Development Board (based on Atmel SAMA5D35) using MYC-SAMA5D35 
MYD-SAMA5D36 Development Board (based on Atmel SAMA5D36) using MYC-SAMA5D36 



Table 1-1 Comparison for Model Selection

 
From table 1-1, we can see if you need Gigabit Ethernet, except MYD-SAMA5D31, other four models all can support; if you need two CANs, Gigabit Ethernet but no need LCD, MYD-SAMA5D35 is a good choice; if you want to evaluate the performance of this industrial board, MYD-SAMA5D34 and MYD-SAMA5D36 has the most complete functions.
 
The MYD-SAMA5D3X Development Kit contains Linux 3.6.9 and android 4.0.4 software packages, necessary cable accessories as well as detailed documents to allow customers to start development soon when getting the goods out of box. It is a solid and flexible evaluation board reference design to enable users to extensively evaluate, prototype and create applications that require audio, mass storage, networking, connectivity and more. Typical applications are such as control panel/HMI, smart grid, medical and handheld terminals, smart watches, outdoor GPS, DECT (digital enhanced cordless telecommunications) phones, etc

Product Features

Processor

          • Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36
            - ARM Cortex-A5 processor, operates at up to 536MHz (850DMIPS)
            - 16KB data Cache,16KB instruction Cache

            - 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System Architecture (VMSA)
            - Fully Integrated MMU and Floating Point Unit (VFPv4)
            - 128KB of SRAM and 160KB of ROM

          Memory and Storage

          • 512MB DDR2 SDRAM (256MB is optional)
          • 256MB Nand Flash, 4MB Data Flash, 16MB Nor Flash
          • One MMC/SD card slot
          • One TF Card slot
          Peripheral Interfaces
          • Serial ports
            - 1 x
             3-line RS232 Debug serial port (DB-9) 
            - 1 x 5-line RS232 serial port (UART1, DB-9) 
            - 1 x RS485 serial port (UART2, 10-pin 3.5mm pitch terminal block connector)
          • 2 x High speed USB HOST
          • 1x Mini USB OTG (be configured as USB device by default)
          • Ethernet 
            ETH1_10/100Mbps for SAMA5D31/35/36, 
            - ETH0_10/100/1000Mbps for SAMA5D33/34/35/36
          • 2 x CAN interfaces (only for SAMA5D34/35/36)
          • 1 x HDMI interface (driver provided but no source code, SAMA5D35 can not support)
          • 1 x Camera interface (driver has not been provided at present)
          • 1 x Telephone interface (driver has not been provided at present)
          • Audio input port
          • Audio output port
          • 1 x LCD interface (Supports 24-bit true color TFT LCD, resolution up to 2048 x 2048 pixels, SAMA5D35 can not support)
          • 1 x 4-wire touch screen interface
          • 1 x 20-pin standard JTAG interface
          • 1 x Reset button, 1 x Wakeup button and 2 x User buttons
          • 2 x Power indicators (Red, one on base board and one on CPU module)
          • 1 x User LED (Blue, on CPU module)
          • 2 x expansion interfaces (J2, J3 and J4) brings out:
            2 x SPI, 2 x I2C, 1 x PWM, 4 x ADC, 41 x GPIOs (some are multi-plexed)

          Mechanical Parameters

          • Dimensions: 
            - Base board: 154mm x 110mm
            - CPU Module (MYC-SAMA5D3X): 45mm x 67.6mm
          • PCB layers:
            - Base board: 4-layer design
            - CPU Module: 8-layer design
          • Power supply: 5V/2A
          • Working Temp.: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

          OS support

          • Supports running Linux 3.6.9 OS
          • Supports running Andriod 4.0.4 OS

          Hardware Specification

            The Atmel SAMA5D3 series of microprocessor units (MPUs) is based on the ARM® Cortex™-A5 processor, operating at up to 536MHz (850DMIPS) at under 150mW, delivering a high-performance, low-power platform for cost-sensitive industrial and consumer applications. It has comprehensive peripheral set for connectivity and user interface applications including Gigabit and 10/100 Ethernet, up to three HS USB ports, dual CAN, three SDIO/SD/MMC, UARTs, SPIs, TWIs, soft modem, LCD controller with graphics accelerator, camera interface, 12-bit ADC, 32-bit timers and more. Figure 1-3 SAMA5D3 Series Key Features The MYD-SAMA5D3X series development boards include one CPU module mounted on one base board. It exposes many of the Atmel SAMA5D3 features to the user in support of developing specific solutions.

             

            SAMA5D3 Series Key Features

             

            The MYD-SAMA5D3X series development boards include one CPU module mounted on one base board. It exposes many of the Atmel SAMA5D3 features to the user in support of developing specific solutions. The board is characterized as in below table:

             

             

            Item

            MYD-SAMA5D31

            MYD-SAMA5D33

            MYD-SAMA5D34

            MYD-SAMA5D35

            MYD-SAMA5D36

            Processor

            ATSAMA5D31

            ATSAMA5D33

            ATSAMA5D34

            ATSAMA5D35

            ATSAMA5D36

            CPU Module

            MYC-SAMA5D31

            MYC-SAMA5D33

            MYC-SAMA5D34

            MYC-SAMA5D35

            MYC-SAMA5D36

            - 536MHz Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36 ARM Cortex-A5 Processors
            CPU internal 128KB of SRAM and 160KB of ROM
            - On-board 512MB DDR2 SDRAM, 256MB Nand Flash, 16MB Nor Flash, 4MB Data Flash
            - On-board Gigabit Ethernet PHY
            - 1.8V DDR2 SO-DIMM 200-pin Expansion Connector 

            SO-DIMM 200-pin Signals Consistent with Atmel's SAMA5D3 Official Board

            Dimensions

            CPU Module – 67.6 x 45mm; Base board – 154 x 110mm

            PCB Layer

            CPU Module – 8-layer design; Base board – 4-layer design

            Power Supply

            5V/2A

            Working Temp.

            0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

            Storages

            One Micro SD card slot

            One SD/MMC card slot

            Serial ports

            One 3-line RS232 Debug serial port (DB-9)

            One 5-line RS232 serial port (UART1, DB-9)

            One RS485 serial port (UART2, 10-pin 3.5mm pitch terminal block connector)

            USB

            Two High-speed USB 2.0 Host ports (Type A)

            One Mini USB 2.0 OTG port (Mini USB Type-AB)

            Ethernet

            ETH1_10/100

            ETH0_10/100/1000

            ETH0_10/100/1000

            ETH1_10/100

            ETH0_10/100/1000

            ETH1_10/100

            ETH0_10/100/1000

            CAN

            0

            0

            2

            2

            2

            Audio

            Audio input/output port

            LCD/TSP

            Support

            Support

            Support

            Not support

            Support

            Supports 24-bit true color TFT LCD, resolution up to 2048 x 2048 pixels

            4-line resistive touch screen

            4.3-inch LCD for option (including Touch screen, with resolution 480 x 272 pixels)

            7-inch LCD for option (including Touch screen, with resolution 800 x 480 pixels)

            Camera

            One ISI interface (driver is not provided at present)

            HDMI

            One HDMI interface (driver is not provided at present)

            Telephone

            One Telephone interface (driver is not provided at present)

            JTAG

            20-pin standard JTAG interface

            RTC

            Battery backed RTC socket (Battery CR1220 and CR1225 models are recommended)

            Buttons

            One Reset button, One Wakeup button and Two User buttons

            LED

            Two Power indicators (Red, one on CPU board and one on base board)

            One user LED (Blue, on CPU board)

            Expansion Interface

            There expansion interfaces (J2, J3, J4) brings out:

            2 x SPI, 2 x I2C, 1 x PWM, 4 x ADC, GPIOs

            Note: The resources brought out from the expansion interfaces may be multiplexed with others. Please refer to the product user manual and schematics for details for your development.

             

            MYD-SAMA5D3X Block Diagram

             

             

            Dimension Chart

            Software Features

            The MYD-SAMA5D3X is a Linux and Android ready-to-run development board. MYIR offers software packages along with the board. Many peripheral drivers are provided in source code to help customers quickly start their own development and create their own applications. The software features are summarized as below:
             

            OS

            Item

            Features

            Description

            Linux

            Boot

            Boot Strap

            First boot program (source code available)

            u-boot

            Secondary boot program (source code available)

            Boot Mode

            Boot Linux from NAND Flash

            Image update

            Support programming kernel image into Nand Flash through USB

            File system update

            Support programming file system into Nand Flash through USB

            Kernel

            Version

            Linux 3.6.9 (source code available)

            File system

            Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS

            File system

            Format

            UBIFS file system

            Drivers

            USB Host, USB Device, Ethernet, MMC/SD, CAN, RS485, NandFlash, TWI (I2C), SPI, WM8904 (Audio), LCD Controller, RTC, Touch-Screen, PWM, USART, LED 
            (source code available)

            HDMI (no source code provided)

            Graphical Library

            QT

            Already ported (source code available)

            Android

            Kernel

            Version

            Android 4.0.4

            Drivers

            Ethernet, Serial port driver (USART1, DBGU), USB (USB_HOST*2,USB_OTG), 
            SD card driver (Micro SD, MMC/SD), 
            LCD+touch (LCD and touch screen driver), GPIO driver

            HDMI (no source code provided)
             

             One MYD-SAMA5D3X Development Board
             One DB9-to-DB9 Serial cable
             One Net cable
             One USB cable
             One 5V/2A Power adapter
             One Product DVD (including user manual, datasheet, schematic in PDF format and software packages)

            Fabricants
            Recherche rapide
             
            Utilisez des mots-clés pour trouver le produit que vous recherchez.
            Recherche avancée
            Langues
            English
            Pour Nous Contacter: O1 3O 50 O9 36
            Information fabricant
            MYIR
            Autres produits
            Informations Paiement
            Envoi rapide par UPSPaiement Sécurisé <br/>3D Secure
            VISAMasterCard

            Paiement Sécurisé
            3D Secure

            Boutique Mini PC

            Boutique Mini PC
            Affichage,
            Controle Industriel,
            Transports