SBC8530 DM3730 Single Board Computer avec kit
[SBC8530]

236€ HT

[SUR COMMANDE]

TI DM3730 DaVinci Digital Media Processor 1GHz ARM Cortex-A8 core
Supports for Linux, Android and WinCE

SBC8530 DM3730 Single Board Computer avec kit
CommanderAvis des clients
SBC 8530 DM3730 Single Board Computer

-TI DM3730 DaVinci Digital Media Processor 1GHz ARM Cortex-A8core
- Onboard 512MByte DDR SDRAM, 512MByte NAND Flash
- UART, 4 USB Host, USB OTG, Ethernet, WiFi/BT, Audio, TF, ...
-  24-bit TFT LCD, DVI-D and S-Video Output Display
- Optional VGA, Camera, GPS, GPRS, WiFi and 3G 
- Ready-to-Run Linux2.6.32, Android 2.2 and WinCE 6.0 OS

General Description

Measuring only 86mm by 86mm, Embest SBC8530 Single Board Computer provides a high-performance and highly-integrated single-board solution to support using in various applications such as navigation systems, media player, medical patient monitoring devices, industrial test and measurement devices, industrial vision and portable communication.
 



Hardware Features

Mechanical Parameters

    • Dimensions: 86mm x 86mm
    • Working temperature: 0~70 Celsius
    • Input Voltage: +5V
    • Humidity Range: 20% ~ 90%
    • Power Consumption: 0.31A @ 5V (working without LCD)

Package on Package POP CPU/Memory chip

    • TI DM3730 DaVinci Digital Media Processor
      - Up to 1-GHz ARM® Cortex™-A8 Core, also supports 300, 600, and 800-MHz operation
      - Up to 800-MHz TMS320C64x+™ DSP Core, Also supports 260, 520 and 660-MHz operation
      - NEON™ SIMD Coprocessor (DM3730 only)
      - POWERVR SGX™ Graphics Accelerator
      - ARM: 32KB I-Cache; 32KB D-Cache; 256KB L2 Cache
      - Onchip 32KB ROM and 64KB Shared SDRAM
    • 512MByte DDR SDRAM, 32bit, 200MHz
    • 512MByte NAND Flash, 16bit

Audio/Video Interfaces

    • LCD/Touch Screen interface (50-pin FPC connector, support resolution up to 2048*2048)
    • DVI high-resolution image output port (HDMI interface, support 720p, 30fps signal)
    • One S-Video display interface
    • One audio input interface (3.5mm audio jack)
    • One 2-channel audio output interface (3.5mm audio jack)
    • One camera interface (30-pin FPC connector, support CCD or CMOS camera)

Data Transfer Interfaces and Other Facilities

    • 1 x 5 line Debug serial port, RS232 voltage (brings out by DB9 connector)
    • 1 x USB2.0 OTG port, High-speed, 480Mbps (can only be configured as USB Device)
    • 1 x USB2.0 Host port, High-speed, 480Mbps
    • 1 x TF card slot
    • 1 x 10/100Mbps Ethernet interface (RJ45 connector)
    • WiFi/Bluetooth Module (WG7310)

Input Interfaces and Other Facilities

    • One RESET button
    • Two USER buttons (Defined as MENU and BACK in Android system)
    • One expansion connector (2.0mm 40-pin SMT Female Pin Header, on the rear of the board)
      - 1 x 5 line serial port, TTL voltage
      - 1 x 3 line serial port, TTL voltage
      - 1 channel McSPI Interface (Multichannel Serial Port Interface)
      - 1 channel McBSP interface (Multi-Channel Buffered Serial Port)
      - 1 channel I2C interface
      - 1 channel HDQ interface (HDQ/1-Wire)

Software Features

OS

Item

Remark

Linux

BIOS

x-loader

NAND/ONENAND

MMC/SD

FAT

u-boot

NAND/ONENAND

MMC/SD

FAT

Kernel

Linux 2.6.32

Supports ROM/CRAM/EXT2/EXT3/FAT/ NFS/ JFFS2/UBIFS file systems
Device DriverDebug Serial port, RTC, Ethernet, Nand Flash, LCD, Touch screen, DVD-D, S-Video, TF card, USB OTG, USB ehci, Audio input/output, keys, LED, WiFi/BT (provided with source code)
Power Management (backlight)
AndroidKernelAndroid 2.2
Device DriverDebug Serial port, RTC, Ethernet, Nand Flash, LCD, Touch screen, TF card, USB OTG, USB ehci, Audio input/output, keys, LED (provided with source code)
WiFi, Bluetooth, 2D/3D (not provided with source code)
Power Management (backlight)

APPs

Application moduleMP3/MPEG4/H264 DSP hardware decoder

WinCE

BIOS

x-loader

NAND / ONENAND

MMC / SD

FAT

e-boot

NAND / ONENAND

MMC / SD

FAT

Device Driver

Debug Serial port, RTC, Ethernet, Nand Flash, LCD, Touch screen, TF card, USB OTG, USB ehci, Audio input/output, keys, LED, 2D/3D (provided with source code)
RTC, WiFi, Bluetooth (not provided with source code)
Power Management (backlight, battery, Sleep/Wakeup)

APP

application moduleFlash Player plug-in and Flash player
MP3/MPEG4/H264 DSP hardware decoder
Testing Demo

GPIO

General Description

Measuring only 86mm by 86mm, Embest SBC8530 Single Board Computer provides a high-performance and highly-integrated single-board solution to support using in various applications such as navigation systems, media player, medical patient monitoring devices, industrial test and measurement devices, industrial vision and portable communication.

The SBC8530 Single Board Computer is with small form factor and uses POP (Package on Package) CPU/Memory chip to interface the 1GHz DM3730 processor to 512MBytes of Nand flash and 512MBytes of DDR SDRAM. The board has exposed many interfaces including serial port, USB, Ethernet, Camera, Audio, LCD, Touch screen, DVI-D, S-Video and etc. It also features a WiFi and Bluetooth module WG7310 on board to enhance the wireless network functions. On the rear of the board there is a TF card slot to extend the storage capabilities as well as an expansion interface to allow user’s development extension.

The board is able to support for Linux 2.6.32 and WinCE 6.0 operating systems. It is provided with complete software BSP, the drivers of which are many in source code. The board has two methods to boot the system and you can boot the board from either TF card or NAND Flash. Besides, it is provided with Android 2.2 demo with driver source code. Embest gives instructions on how to boot Android demo image from NAND flash with TF card.

If user purchases the complete configuration of the SBC8530 Single Board Computer, the deliveries will include the SBC8530 board and all necessary accessories and user manual, schematic drawing, datasheet documents, software BSP in one DVD. This enables users to quickly start their own development based on this platform. The board is preloaded with Linux OS in NAND flash and WinCE OS in TF card. User can display the system by using a 4.3" or 7”TFT LCD and Touch screen or using a DVI-D monitor with an HDMI to DVI-D cable, or using a TV for NTSC or PAL video display.   

Additionally, Embest offers various functions modules for SBC8530 including VGA, WiFi, Analog Camera, 3G and Digital Camera modules which greatly extends the functions of the board and would be flexible for customer selection to meet their own needs.



ItemDescriptionInterface to BoardLinuxAndroidWinCE
VGA8000VGA ModuleLCDSupport*Not yetSupport*
CAM8000-AAnalog Camera ModuleCameraSupport*Not yetNot yet
WF8000-UWiFi ModuleUSB HostSupport*Not yetSupport#
CAM8100-UDigital Camera ModuleUSB HostSupport*Support*Support#
CAM8000-DDigital Camera ModuleUSB HostSupport#Support#Support*
GPS8000-SGPS ModuleUARTSupport*Not yetSupport*
GPRS8000-SGPRS ModuleUARTSupport*Support*Support*
CDMA8000-U3G Module
(CDMA2000 standard)
USB HostSupport*Support*Support#
WCDMA8000-U3G Module
(WCDMA standard)
USB HostSupport*Support*Support#

* = Provided with Source Code
 

Other Relative Documents and Links

SBC8530 board overview

Dimension drawing of SBC8530 board

One SBC8530 board
One 2GB TF card
One Serial cable (DB9-DB9)
One 5V@2A Power adapter
One USB cable (Type A Male to Type Mini-B Male)
One USB cable (Type A Female to Type Mini-A Male)
One Cross Ethernet cable
One HDMI to DVI-D cable
One S-Video cable
One WiFi antenna
One Product DVD (including user manual, schematic in PDF format, datasheet, Linux 2.6.32 BSP, Android 2.2 BSP and WinCE 6.0 BSP)

Onboard Interfaces and Connectors

Options :

Caméra Analogique

Ajout d'un module d'interface pour camera analogique

Ajout d'une camera analogique





Camera Numerique (CAM8000-D)

Ajout d'une Camera avec  Interface Numérique


Camera USB (CAM8100-U)
Embest CAM8100-U Digital Camera Module is designed for using on Embest Devkit8000, SBC8100 and VSS3530 products connecting via USB 2.0 Host port. It uses a CMOS image sensor which is a 1.3Mega Pixel Digital Camera.

Module GPRS (GPRS8000-S)
GPRS (General Packet Radio Services) is a packet-based wireless communication service which is used for various data applications on phones, including wireless Internet (WAP), MMS, and software that connects to the Internet. It is an overlay to the GSM network. Embest GPRS8000-S module is an ARM based embedded GPS module which allows to connect to Embest Devkit8000 OMAP3530 board for GSM/GPRS solution.

Module GPS (GPS8000-S)
Ajout d'un module GPS pour port série, avec antenne.


Module USB 3G UMTS (CDMA8000-U)
Embest CDMA8000-U Module is a UMTS standard 3G module support for CDMA2000 3G mobile technology standard. It is fit to EDGE, GPRS and GSM networks and can achieve global, wireless internet. It has a USB2.0 interface that can support various devices with 3G function. 

Module USB 3G WCDMA(WCDMA8000-U)
Embest WCDMA8000-U Module is a UMTS standard 3G module support for WCDMA 3G mobile technology standard. It is fit to EDGE, GPRS, GSM and WCDMA (HSPA) networks and can achieve global, wireless internet. It has a USB2.0 interface that can support various devices with 3G function.

Module VGA (VGA8000)

Ajoute le modue VGA externe VGA8000


TFT LCD 4"3 ou 7"
Ajoute un écran tactile  4"3 ou 7" TFT LCD - Embest



236€ HT

 
Fabricants
Recherche rapide
 
Utilisez des mots-clés pour trouver le produit que vous recherchez.
Recherche avancée
Langues
English
Pour Nous Contacter: O1 3O 50 O9 36
Information fabricant
Embest
Page d'accueil de Embest
Autres produits
Informations Paiement
Envoi rapide par UPSPaiement Sécurisé <br/>3D Secure
VISAMasterCard

Paiement Sécurisé
3D Secure

Boutique Mini PC

Boutique Mini PC
Affichage,
Controle Industriel,
Transports