349€ ex. VAT

8 channel Thermocouple datalogger
Thermocouples are sold separalety
  • 8 channel thermocouple data logger
  • Measures from –270 to +1820 °C (–454 to +3308 °F)
  • High resolution and accuracy
  • Expandable to 20 units / 160 channels
  • Supports all popular thermocouple types
  • Fast sampling rate — up to 10 measurements per second (including CJC)
  • USB connected and powered
  • PicoLog for Windows data logging software included
  • Windows, Mac OS X and Linux drivers included

Temperature measurement and recording with the TC-08 is very easy — simply plug the TC-08 into a USB port on your computer, plug in your thermocouples, and you are ready to go.

Wide temperature range

The TC-08 thermocouple data logger is designed to measure a wide range of temperatures using any thermocouple that has a miniature thermocouple connector. Pico supply a wide range of suitable thermocouples.
All popular types of thermocouple are supported, allowing an effective temperature range of –270 to +1820 °C  (the actual temperature range depends on the thermocouple being used).
The built in Cold Junction Compensation (CJC) circuit can also be used as a 9th channel to measure room temperature.

Fast and accurate temperature data acquisition

With the TC-08 thermocouple data logger your temperature measurements can be made both fast and accurately.
The short conversion time of the TC-08 means up to 10 temperature measurements can be taken every second (cold junction compensation counts as an additional measurement), while the high (20-bit) resolution ensures that the TC-08 can detect minute changes in temperature.  For popular Type K thermocouples the TC-08 can maintain a better than 0.025°C resolution over a –250 to +1370 °C range.

Also measure voltage and 4–20 mA current loops!

As well as measuring temperature with thermocouples, the terminal board allows other sensors with voltage or current outputs to be connected.  
The optional Single-Channel Terminal Board (see Accessories) plugs into a channel on the TC-08 and turns it into a 20-bit high resolution data logger. Screw terminals allow wires to be attached to the data logger without soldering. The four input ranges (±50 mV, ±500 mV, ±5 V and 4-20 mA) allow a wide range of other sensors and signals to be measured.

All you need in one easy-to-use unit

Temperature data acquisition with the TC-08 is very easy — simply plug the TC-08 into a USB port on your computer (no external power required), connect your thermocouples, and you are ready to measure temperatures.
The easy-to-use PicoLog data acquisition software is supplied with the TC-08 — allowing you to start measuring and recording temperatures with the minimum effort. The intuitive user interface of PicoLog makes it easy for you to set how frequently you want to take a measurement, and the number of measurements you want to take.

Need more?...

If you need more than 8 channels just plug two TC-08s into your PC to make a "TC-16".  Using a USB hub up to 20 TC-08s can be used on one PC for a total of 160 


USB TC-08 Thermocouple Data Logger general specifications
Number of channels (single unit)8
Maximum number of channels
(using up to 20 TC-08s)
Conversion time100 ms per thermocouple channel
+ 100 ms for cold junction compensation
(CJC can be disabled if all channels used as voltage inputs)
Temperature accuracySum of ±0.2% of reading and ±0.5 °C
Voltage accuracySum of ±0.2% of reading and ±10 µV
Overvoltage protection±30 V
Maximum common-mode voltage±7.5 V
Input impedance2 MΩ
Input range (voltage)±70 mV
Resolution20 bits
Noise-free resolution16.25 bits
Thermocouple types supportedB, E, J, K, N, R, S, T
Input connectorsMiniature thermocouple
PC requirements
MinimumProcessor: 1 GHz.
Memory: 512 MB.
Free disk space: 32–bit: 600 MB, 64–bit: 1.5 GB.
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7, Windows 8 (not Windows RT) or Windows 10.
Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac).
Ports: USB 1.1 port.
RecommendedProcessor: 1 GHz.
Memory: 512 MB.
Free disk space: 32–bit: 850 MB, 64–bit: 2 GB.
Operating system: 32– or 64–bit edition of Microsoft Windows 7, Windows 8 (not Windows RT) or Windows 10.
Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac).
Ports: USB 1.1 or higher.
Operating temperature0 to 50 °C
Operating temperature for stated accuracy20 to 30 °C
Operating humidity5 to 80 %RH non-condensing
Storage humidity5 to 95 %RH non-condensing
Water resistanceNot water-resistant
Physical properties
Dimensions201 x 104 x 34 mm (7.91 x 4.09 x 1.34 in)
PicoLog for WindowsPicoLog data acquisition software can collect up to 1 million samples. Features include:
Multiple views — view data as a graph, spreadsheet or text
Parameter scaling — convert raw data into standard engineering units
Math functions — use mathematical equations to calculate additional parameters
Alarm limits — program an alert if a parameter goes out of a specified range
IP networking — transfer measurements via a LAN or over the Internet
Operating systems supported — Microsoft Windows XP (SP3) to Windows 10. Not Windows RT.
PicoLog languagesFull support for: English, Français, Deutsch
Menus and dialogs only for: Italiano, Español, Svenska
Software Development KitIncludes example code.
Optional free softwareDrivers for Linux and OS X. 32-bit and 64-bit.
Documentation languages
User’s guide
Programmer’s guide
Installation guide
English, Français, Deutsch, Italiano, Español, Svenska, Nederlandse, Dansk
Additional hardware (supplied)USB 2.0 cable, user manuals, software CD-ROM
PC interfaceUSB 1.1
Power requirementsPowered from USB port
ComplianceEuropean EMC and LVD standards
FCC Rules Part 15 Class A
Total satisfaction guaranteeIn the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty5 years

TC-08 resolution

Thermocouple typeOverall range °C0.1 °C resolution0.025 °C resolution
B20 to 1820150 to 1820600 to 1820
E–270 to 910–270 to 910–260 to 910
J–210 to 1200–210 to 1200–210 to 1200
K–270 to 1370–270 to 1370–250 to 1370
N–270 to 1300–260 to 1300–230 to 1300
R–50 to 1760–50 to 176020 to 1760
S–50 to 1760–50 to 176020 to 1760
T–270 to 400–270 to 400–250 to 400

   TC-08 Brochure
TC-08 device
USB cable
Free Software supported:



Available Options:

Single-channel TC-08 terminal bo

Single-channel TC-08 terminal board

The USB TC-08 Single-Channel Terminal Board is an accessory for the USB TC-08 Thermocouple Data Logger. The screw terminals allow wires to be attached to the data logger without soldering and enable the USB TC-08 to measure voltages in the ranges ±5 V, ±500 mV and ±50 mV, or 4–20 mA current loop.

Single channel TC-08 terminal board

Thermocouple type K, PTFE, 2 m

Thermocouple type K, exposed tip, PTFE insulated, 2 m

SE027 Thermocouple characteristics
Tip diameter 1.5 mm
Tip temperature –75 to +250 °C
Cable length 2 m (about 6 ft)
Plug type Molded flat pin mini-plug

Thermocouple type T, PTFE, 2 m

Thermocouple type T, exposed tip, PTFE insulated, 2 m

SE047 specifications
Type T class 1 temperature range –75°C to +260°C
Type T class 1 accuracy –40°C to +125°C: ±0.5°C, +125°C to +260°C: ±0.4%
Tip construction Exposed junction / welded tip
Connector Miniature thermocouple connector
Cable material PTFE
Length 2 m (about 6 ft)

349€ ex. VAT

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
228000€ ex. VAT
Please Contact Us at: +33 1 3O 50 O9 36
Manufacturer Info
Pico Homepage
Other products
Payment informations
UPS3D Secure Payment

3D Secure Payment

Mini PC and Car PC

Mini PC and Car PC
Industrial Control