LE-110SA Line Monitor
[LE-110SA]

1113€ ex. VAT

[UPON REQUEST]
Line Monitor
RS-232, RS-422/485  ASYNC
Color touch screen

only 300g, easy to take away
LE-110SA Line Monitor
Reviews

LE-110SA is a handheld line monitor specialized for ASYNC communication which is widely used in the industry. You can control the line monitor by soft screen touch as you do for smart phones. The light weight (300g including batteries) helps you for the field maintenance besides the system developments.
 

Specifications

InterfaceRS-232C, RS-422/RS-485
ProtocolASYNC
Capture Memory16Mbyte (acout 4000Kdata), 2 part division is available
Speed (bps)50, 75, 150, 300, 600, 1200, 2400, 4800, 9600, 12800, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800, user specified speed*1
Data length7bit, 8bit
Parity bitNONE, EVEN, ODD
Stop bitƒg1bit, 2bit
Error checkParity, framing, brake
Data codeASCII, JIS, EBCDICCHEX
Idle timeResolution 100ms, 10ms, 1ms, OFF(no display) can be selected. Max 999.9 seconds
Time stampDate time stamp: Unit selectable among "Year/Mon/Day Hr:Min," "Mon/Day Hr:Min:Sec," "Day Hr:Min:Sec.10ms," or OFF (with no record)
Line stateRecords and displays the wave form and logical status of external trigger input and control line along with the transmission/reception data.
Data searchCommunication error, Max 8 characters data line (Don't care and bit maskare available)), idle time more than the specified duration, time stamp within the specified time range, cueing and counting of trigger matching data
Trigger functionUp to four pairs of trigger conditions and actions can be specified.
ConditionCommunication error, communication data string up to 8 characters (don't care and bit mask are available), idle time more than the specified duration, Timer/counter match, logical status of the control line and external trigger.
ActionStops measurement/test (number of offsets until a stop can be set), validates trigger conditions, controls timer, controls counter, activates buzzer, saves monitor data into a USB flash, sends the specified character string, sends pulse output to external trigger terminal OT2
Monitor conditions auto settingAutomaticalle configures the setting (max 460.8Kbps)*2
Simulation function*3Test data transmission, ON/OFF of RTS/DTR
Transmission dataMax 16 (up to 16K in total) transmission data an be registered. 14 pre-set data and break output are available.
Driver IC controlAuto control is available
File management functionMeasured data and measurement condition can be saved into a USB flash and can be read from the USB flash.
Power save functionAutomatic light reduction, auto power off
Remote controlPC link software (light version) is offered for free.
Line status LEDLogical status of SD(TXD), RD(RXD), RTS, CTS are displayed.
Display4.3 inch TFT color display (480x272dot)
Touch panelCapacitance touch panel
USB2.0 device portMicro B connector, high speed transmission supported. Used for PC connection and firmware update.
USB2.0 host portStandard A connector, high speed transmission supported. Used for USB flash connection*4
PowerUSB bus power 5V/500mA
Two AA Ni-MH batteries or two AA alkaline batteries (LR6)
Drive time*5AA Ni-MH batteries: about 5 hours
AA alkaline batteries: about 2 hours
Temperature & humid0 to 40 degrees celcius (-10 to 50 degrees celcius for storage), under 85%RH
Size & weight158mm x 100mm x 31mm, 300g(including batteries)
AccesoriesDB9 branch monitor cable (LE-009M2), trigger I/O cable (LE-4TG), micro USB cable, two AA Ni-MH batteries, utility CD, carrying bag, quick start guide, warranty card
Options
ProductModelRemarks
USB chargerLE-P1USBUsed to provide bus-power to the line monitor or to charge Ni-MH batteries.
Monitor cable for DSUB25 pinLE-25M1Used with the Dsub25-9 adapter when the target device has DSUB25 pin interdace.
DSUB25-9 adapterLE-259AD2DSUB25(female)-DSUB9(female) connector adapter. Can be connected to the RS-232C port of the line monitor to change it to DSUB25pin monitor port.
PC link softLE-PC300RPC link software for Windows PC
Note: Ver1.05 or later is needed.

*1: User specified speed can have a margin of error.
*2: It cannot work properly when there are little communication data or when the data do not have 101,010 bit pattern.
*3: Only DTE mode is available
*4: Not all the USB falshes are supported.
*5: Based on our testing by common usage.
LE-110SA
DB9 branch monitor cable (LE-009M2)
trigger I/O cable (LE-4TG)
micro USB cable
two AA Ni-MH batteries
utility CD
carrying bag
quick start guide
warranty card
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Languages
Français
Please Contact Us at: +33 1 3O 50 O9 36
Manufacturer Info
LineEye
LineEye Homepage
Other products
Payment informations
UPS3D Secure Payment
VISAMasterCard

3D Secure Payment

Mini PC and Car PC

Mini PC and Car PC
Display,
Industrial Control
Transportation