NeoVI RED + Vehicle SPY Basic - Value Package
[RED-VSPY-BAS]

1920€ HT

[EN STOCK]
Interface USB  2xCAN, 2xLIN
Datalogger 4Go
Logiciel interactive VehicleSPY 
(Basic)
Datalogger / interface CAN & LIN basiques avec logiciel d'exploitaiton
NeoVI RED + Vehicle SPY Basic - Value Package
Avis des clients

Surveille les réseaux CANet LIN avec enregistrement sur carte mémoire intégrée

  • Module intelligent  de capture de traffic CAN et LIN
  • Livré avec Vehicle Spy 3 Basic  Edition
  • Enregistre le traffic sur carte microSD 4 Go
  • Interpretation des messages par base de données
  • Filtrage des données évolué
  • Emission de messages CAN
Vehicle Spy Basic  est un outil unique pour l'acquisition de données et l'observation des bus de réseaux de communication dans les véhicules. Vehicle Spy a été conçu dans une optique de simplicité d'emploi et de productivité pour les utilisateurs. 
Vehicle Spy permet à plusieurs utilisateurs d'un meme poste de suivre chacun son propre projet, ses données collectées, et scripts de fonctionnement. Des didacticiels simples à suivre permettent aux utilisateurs de se familiariser avec toutes les possibilité de Vehicle Spy en une journée.  

Vehicle Spy s'utilise  avec les modules NeoVI possédant des interfaces CAN, LIN, ISO9141 etc.
Ce package promotionnel est composé d'un NeoVI RED  à deux bus CAN, deux bus LIN et d'une licence Vehicle Spy Basic.

Une mise à niveau vers la version PRO  est possible.

Specifications du NeoVI RED

  • neoVI 3G Architecture over 10x performance over previous devices
  • 3 DSPs and 1 RISC processor for 125 MIPS of processing
  • Power Consumption (typical) : 150mA @ 14.4 VDC
  • Sleep Power Consumption (typical) : 12mA @ 12.0 VDC
  • Power Supply: 6-27 Volt Power Operation (Physical layers non functional under 6 volt)
  • Dual user notification LED (red and green)
  • Temperature Range: -40C to +85C
  • Vehicle Connectors : 25 Pin male D-SUB and 9 Pin Male D-SUB
  • Warranty: One Year Limited Warranty
  • Firmware: Field upgradeable design (flash firmware)
  • General Purpose IO: 6 MISC IO (0 - 3.3V), 4 IO can be configured as analog inputs
  • General Purpose IO rate report interval: 10 Hz to 1 Khz or based on digital change
  • Microsoft Certified USB drivers
  • Isolated USB
  • Stand-Alone Mode Including Scripting, Receive Messages, Transmit Messages, Expressions, IO, and Transport Layers
  • J2534 and RP1210 A/B compatible for CAN/ISO15765, Keyword, and ISO9141.
  • microSD card slot support for up to 32 Gigabytes of storage (A 2 GB cards is included with the device.) The removable card is formatted using FAT32 for direct usage in a PC.
  • Battery backed real time clock (RTC).

Networks - General

  • 64 Bit time stamping to accuracy of 10 microseconds on CAN and LIN networks and never overflows. 0.5 microsecond accuracy timestamp available if using one network only.
  • Simultaneous operations on all CAN/LIN networks.
  • Transmit message double-buffering on all networks allows back to back message transmission.

Network Specifications

2x CAN Channels

  • 1 Dedicated ISO11898 Dual Wire CAN Physical Layer (TJA1040)
  • 1 User selectable from ISO11898 Dual Wire CAN Physical Layer (TJA1040), ISO11519 Low Speed Fault Tolerant CAN Physical Layer (TJA1054A), or Single Wire CAN Physical Layer GMW3089 / SAE J2411 (MC33897)
  • CAN 2.0B Active
  • Up to 1 M-Bit Software Selectable Baud Rate (auto baud capable)
  • Capable of generating and detecting error frames (With firmware update)
  • Graphical Bit Time / Baud Rate Calculator
  • Listen only mode support
  • High Speed Mode, Test Tool Resistor, and High Voltage Wakeup support

2x LIN (Local Interconnect), ISO9141, Keyword 2000, or K and L Line

  • Full support for LIN 1.X, 2.X and J2602
  • LIN J2602 / 2.X compatible physical layer
  • Software enabled 1K LIN Master Resistor PER CHANNEL
  • Capable of Generating LIN Waveforms
  • LIN Bus Monitor Mode identifies errors: Sync Break Error State and Length, Sync Wave Error, Message ID parity, TFrameMax/Slave Not Responding, Checksum Error and Transmit Bit Errors.
  • LIN Bus Master Mode operates at same time as LIN Bus Monitor
  • LIN Bus Slave simulation - with or without an LDF file
  • LIN Bus hardware schedule table with support for LIN diagnostics
  • UART Based State Machine
  • Only first channel supports L
  • Programmable Timing Parameters including Inter-Byte, TX Inter-Frame, RX Inter-Frame and Initialization Waveforms (0.5 ms Resolution)
  • Initialization Waveforms including Fast Init, Five Baud, and Custom
  • Software Selectable Baud Rate
  • Software enabled 512K Resistor (channel one only)

 
Vehicle SPY
FeaturesVehicle Spy Basic
  
Snapshot Diagnosticsyes
Multiple Hardware Supportyes
Message Monitoryes
Realtime Signal Plotting/Graphicsyes
Logging/Capture data filesyes
Post Analysisyes
SupportSecondary Priority, Phone, Email, and Web
TrainingOnline Videos
CAN Message Monitoringyes
LIN Message Monitoringyes
CAN Message Transmit (Tx Panel)yes
CAN Message Generator (Tx Panel)yes
neoVI FIRE/RED Embedded Dataloggingyes
ISO15765-2 Long Message Tx/Rxyes
J1939 BAM Long Message Tx / Rxyes
  
Function Blocks (Playback)yes (maximum of 1)
Function Blocks (Capture)yes (maximum of 1)
  
Message Database SupportVS3, DBC, LDF
  
Software Upgrades12 months of free upgrades
  

Video de démonstration sur le site Intrepid


 




  • Boitier NeoVI RED  avec µSD 4Go
  • Cable USB
  • Cable DB25 vers OBD-II
  • lecteur de carte µSD -USB
  • Logiciel Vehicle SPY Basic  sur CD ou clé USB
  • La  licence /activation est envoyée par email

neoVI RED 25 Pin Connector

 

PinDescriptionPinDescription
1SW CAN13GND
2N/A14HS CAN 1 H
3LSFT CAN H15HS CAN 1 L
4LSFT CAN L16HS CAN 2 H
5MS CAN H17HS CAN 2 L
6MS CAN L18Misc DIO 4
7ISO L19HS CAN 3 H
8ISO K / LIN 120HSCAN 3 L
9DBG CLK21TSYNC CLK H
10Misc DIO 122TSYNC CLK L
11Misc DIO 223Misc DIO 3
12DBG DATA24DBG RESET
  25VBATT

 

 

neoVI RED 9 Pin Connector

 

PinDescription
1LIN 1
2LIN 2
3LIN 3
4LIN 4
5GND
6MISC DIO 5
7MISC DIO 6
8NC
9NC

 



Vehicle SPY versions Comparisons
FeaturesVehicle Spy ProfessionalVehicle Spy BasicVehicle Spy Trial
    
Snapshot Diagnosticsyesyesno
Multiple Hardware Supportyesyesno
Message Monitoryesyesyes (1 message)
Realtime Signal Plotting/Graphicsyesyesyes (5 signals)
Logging/Capture data filesyesyesyes
Post Analysisyesyesyes
SupportPrimary Priority, Phone, Email, and WebSecondary Priority, Phone, Email, and WebOnline Videos
TrainingIncluded / On-site When Possible, Online VideosOnline VideosOnline Videos
CAN Message Monitoringyesyesyes
LIN Message Monitoringyesyesno
CAN Message Transmit (Tx Panel)yesyesno
CAN Message Generator (Tx Panel)yesyesno
neoVI FIRE/RED Embedded Dataloggingyesyesno
ISO15765-2 Long Message Tx/Rxyesyesno
J1939 BAM Long Message Tx / Rxyesyesno
CAN Bus Simulationyesnono
LIN Master Node Simulationyesnono
LIN Slave Node Simulationyesnono
Function Blocks (Playback)yesyes (maximum of 1)no
Function Blocks (Capture)yesyes (maximum of 1)no
Function Blocks (Script)yesnono
Message Database SupportVS3, DBC, UEF, LDF, ODX, ODIVS3, DBC, LDFno
CCP/XCP Calibrationyesnono
ASAP2 Editor / Generatoryesnono
Java Scripting Environmentyesnono
Diagnostic Toolsyesnono
Intrepid Analog Inputyesnono
ECU Flashyesnono
Graphical Panelsyesnono
Application Signal Variablesyesnono
Configurable Diagnosticsyesnono
Test Controlleryesnono
Test Recorderyesnono
J1939 DTC Monitor / Simulatoryesnono
J1939 Address Claim Viewyesnono
GMLAN Virtual Networks Viewyesnono
GMLAN CGI Busyesnono
Software Upgrades12 months of free upgrades12 months of free upgradesno
API for remote controlyesnono

Video de démonstration sur le site Intrepid



Fabricants
Recherche rapide
 
Utilisez des mots-clés pour trouver le produit que vous recherchez.
Recherche avancée
Langues
English
Pour Nous Contacter: O1 3O 50 O9 36
Informations Paiement
Envoi rapide par UPSPaiement Sécurisé <br/>3D Secure
VISAMasterCard

Paiement Sécurisé
3D Secure

Boutique Mini PC

Boutique Mini PC
Affichage,
Controle Industriel,
Transports